Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: AndresRubio on April 04, 2009, 12:25:50 PM

Title: Posting Code Not Work all time
Post by: AndresRubio on April 04, 2009, 12:25:50 PM

Hi, I have problems with G code generation in LazyCam:

When I  import a DXF file, if I generate a G code at this time they create a file, And if the Mach3 is running they load the Gcode.

But when I generate an offset, or a Pocket LazyCam generate layers, but no longer works "Post Code", it says "File posting posting File Complete" but does not create a file that is not sending the gcode to Mach3 ....

   
I have conducted hundreds of tests, but once generated the offset or Pocket, they stops create GCode..

Any idea what happend?  ???

(I bought the license for Mach3 and I use Llazicam'm version 3.0.0.2)
Thanks

Title: Re: Posting Code Not Work all time
Post by: Chip on April 04, 2009, 03:26:12 PM

Hi, AndresRubio

To generated offset or Pocket's, You need a LazyCam License.

Chip