Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Atlas56 on April 01, 2009, 05:12:03 PM

Title: Part Coords and Program Coorrds Difference
Post by: Atlas56 on April 01, 2009, 05:12:03 PM

What is the difference between Part Coords and Program Coords button selector in Mach3Turn in manual screen 1024.lset? The x & z value are always the same. I tried manually entering a value. still both the same.

Title: Re: Part Coords and Program Coorrds Difference
Post by: tubular2000 on April 02, 2009, 09:56:08 AM

i have the same thing on my screen. normaly you should have Machine, Part and User coordinate. where part is your G54 zero point and user is an extra coordinate used for set-up or manual operation.