Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: mrpeja on March 26, 2009, 10:50:58 AM
-
Hi,
In a few days I'm about to finally start the machine. I have read all manuals I can find (THC300A User Guide, Quick Set Up Guide for Plasma Users, THC300 Operating Manual, Mach3 Mill) trying to fully understand how to adjust all parameters for THC and plasma cutting. I'm still a bit confused with some terms and details (e.g. min/max corrections, heights, min/max distances, calibration Floating Head (I found different methods) etc.)
It will be very useful if someone can describe, step by step, all about configuring and adjusting Mach3(not pins&ports), SheetCam, Floating Head and THC300.
I'll be very grateful.
Regards,
Miroslav