Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: ffulmer on March 22, 2009, 11:05:02 AM
-
I used Visual Cam to write a program for a simple part and when I enter it into Mach3 I get a message of "Too Many Subroutines" and it will not run this. What are my options? The part is so simple I can't understand why it won't take it. Any help here would be appreciated.
Fred Fulmer
-
Turn OFF use macros in your post processor.
Bill C.
-
I got it figured out, thanks.
Fred