Machsupport Forum

Mach Discussion => Mach Screens => JetCam screen designer => Topic started by: Tweakie.CNC on March 17, 2009, 11:05:33 AM

Title: JetCam screen designer/editor.
Post by: Tweakie.CNC on March 17, 2009, 11:05:33 AM
Hi all,

The current version of JetCam will not allow the .set screens file to be saved.  :(

Does anyone have a copy of the earlier version (which does allow the screens to be saved as a .set file) which they would be willing to share please ?.  :)

Thanks,

Tweakie.
Title: Re: JetCam screen designer/editor.
Post by: Tweakie.CNC on April 09, 2009, 04:27:47 AM
It appears that JetCam is like a top of the range CNC machine without a cutting tool - You can do all sorts of wonderful things with it except produce a finished part.  :'(

Tweakie.
Title: Re: JetCam screen designer/editor.
Post by: Greolt on April 09, 2009, 05:22:21 AM
Did you see there is a new kid on the block.

MachScreen,    http://www.kd-dietz.de/index_eng.htm

http://www.machsupport.com/forum/index.php/topic,11122.0.html

Still some work to be done but the most promising thing we have seen for a while.

Greg
Title: Re: JetCam screen designer/editor.
Post by: Tweakie.CNC on April 09, 2009, 08:34:12 AM
Thanks Greg - I had not seen the other thread. What a brilliant webpage Klaus has.

Tweakie.
Title: Re: JetCam screen designer/editor.
Post by: s.pi on November 28, 2009, 06:56:57 PM
Is there a version of JetCam available that will allow saving a .set file, commercial or otherwise. I've looked at all of the other screen editors I could find, but JetCam seems far easier than any of the others.
Title: Re: JetCam screen designer/editor.
Post by: Tweakie.CNC on December 20, 2009, 07:25:00 AM
Quote
Is there a version of JetCam available that will allow saving a .set file, commercial or otherwise.

In a word 'no'. ( please prove me wrong someone )  :'(

Tweakie.
Title: Re: JetCam screen designer/editor.
Post by: Tweakie.CNC on October 07, 2010, 06:05:58 AM
For those that follow - The old JetCam editor can be found here  http://www.machsupport.com/forum/index.php/topic,12075.0.html

Tweakie.