Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: ScrappyScooter on February 21, 2009, 11:38:40 PM

Title: g54.295
Post by: ScrappyScooter on February 21, 2009, 11:38:40 PM

According to the 'Mac OEM codes', OEM code 243 is "do G0G53 to G59.254 offset location".
Where can I store the G59.254 offset?

Title: Re: g54.295
Post by: jimpinder on February 22, 2009, 04:24:35 AM

I don't know - the table only goes up to 253, and when I try and use 254, it reverts to 253 anyway.

Can anybody explain - and what the command means.