Machsupport Forum
Third party software and hardware support forums. => Third party software and hardware support forums. => Topic started by: fer_mayrl on February 19, 2009, 05:17:04 PM
-
Hello Guys,
i have a question regarding the routine THC use to find the material initial height.
I know that the two systems i mentioned in the topic use a floating torch which lowers to the material, the torch tip touches the material and floats till it hits a limitswitch. Can this routine be modified?
I ask this because we would like to use the same routine but without having the torch touch the material (clogged tips, dammaged tips etc...), by activating an output to lower a floating foot to do the same thing the torch does... something like in this video...
http://www.manchestervideo.com/WinMedia/CNCPlasmaHeavy.wmv
It could be just like in the video, or without the prox switches and a floating foot.
Can this macro be modified?
Best regards
Fernando
-
Dear Fernando,
If you still looking Initial Height Sensing, please visit our web page http://www.agelkom.com.tr/prod02.htm.
Our capacitive sensor has a good performance, easy to implement and use.
Best regards,
Can