Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: ErnieD on February 17, 2009, 11:55:39 PM
-
Hi,
I recently had to up grade to a new computer and the computer people transferred all of my files from the old computer to the new one. Now when I try to run Mach3, not at the machine but on the house computer, I cannot get any code to run. The reset button is red and the scrolling message reads " emergency mode active press reset". Nothing happens when the reset is pressed. Anyone know what is wrong?
Thanks,
ErnieD
-
Did you transfer the Mach3 XML file containing all your configuration settings from the old Mach3 directory to the new one?
Regards,
Ray L.
-
Change the active state of the E-Stop Input in Ports and Pins.
Hood
-
Hood,
Where do I find ports and pins?
Thanks,
Ernie
-
Config menu, ports an pins then inputs, scroll down to EStop. Possibly the Tormach version being an OEM may not let you in there :(
Hood
-
My apologies to everyone; old timers disease must be setting in. I forgot to set up for running offline.
Thanks to all who replied,
ErnieD
-
aint that just because he is not offline