Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: khalid on February 02, 2009, 09:23:44 AM
-
Is there any link to download Beta Version of Lazy Turn??
-
You should find it in this thread. http://www.machsupport.com/forum/index.php/topic,5767.10.html Reply #806 has the latest I think. It is truely beta right now so I don't think there is anywhere else to download it. That thread is also the place to ask questions, give input.
Brett
-
Brett.. Thanks for guiding me in a right direction.. and what a memory u have man.. I got it right at Post#806:)
-
Last Question..
Can we use Mach3 license file to run LazyTurn or it has separate license???
-
LazyTurn is free for all at this point in time, later on I am not sure.
Hood
-
But when I generate the toolpath..the simulation feature is disabled..:(
-
You really should read through the thread that Brett gave you and even have a look at the LazyTurn manuals that Rich has started writing for it.
As had been mentioned, this is in early beta stages and is not complete.
Dave
-
KAHLID,
You will find info on how to install LazyTurn in section 4.0 / page 5 of 31 of the Lazyturn manual.
Note, that in the manual, the latest posted version was Reply #637 and that is no longer true
as mentioned by Brett.
There is probably 20 different versions of the application file.
Lazyturn can be run independantly in a seperate directory ( which I would recommend).
Follow the manual instructions and let me know if have a problem.
RICH