Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Bostjan on January 14, 2009, 04:41:40 AM

Title: No back move at homing
Post by: Bostjan on January 14, 2009, 04:41:40 AM

HI,

while homing movement hits switch, zeroes, but it does not move back to release the switch.

Where do I have a problem

I have DSPmc controller

RGS
Bostjan

Title: Re: No back move at homing
Post by: Hood on January 14, 2009, 04:50:00 AM

think possibly you need to set a home off distance for the DSPMC but best check with Rufi as I dont know much about it at all.
Hood