Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: jaru-eri on January 05, 2009, 08:37:32 PM

Title: Screen problem.
Post by: jaru-eri on January 05, 2009, 08:37:32 PM

I have problem with getting all letters and numbers on my mach3 screens. Some fields are shortened or cutted of. What can I do in order to fix it?

Title: Re: Screen problem.
Post by: RICH on January 05, 2009, 09:38:46 PM

jaru-eri
I don't have your display problem here, My screen resolution is set at 1024x768.
Do you have any problem with the MACH3 main screen when the program opens?

try in General Config ....check AUTO ENLARGE box located lower middle inside  Screen Control box.

RICH

Title: Re: Screen problem.
Post by: jaru-eri on January 05, 2009, 09:50:21 PM

Thankyou I checked both auto enlarge and high resolution and it looks better now.

Title: Re: Screen problem.
Post by: RICH on January 05, 2009, 09:52:41 PM

 :) RICH