Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: b0gh0s on July 06, 2006, 05:32:17 PM

Title: Using one Mach 3 Installation for multiple machines?
Post by: b0gh0s on July 06, 2006, 05:32:17 PM

Is there a way to setup Mach3 so that I can have two completely different machine profiles (all the settings for limits, stepper tuning, offsets, etc)?

I want to use it with a 4 axis mill and a 3 axis router bed, (not simultaneously).

IS there an easy way to do this?

Title: Re: Using one Mach 3 Installation for multiple machines?
Post by: Hood on July 06, 2006, 05:36:34 PM

Just make seperate profiles for each machine then on starting Mach you can choose which one you want to use.
Hood

Title: Re: Using one Mach 3 Installation for multiple machines?
Post by: Brian Barker on July 07, 2006, 08:44:14 AM

IF you copy the shortcut on the desktop and change the PMach3Mill the to P"whatever" you can set up two icons on the screen. It is under the properties of the icon...