Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: Triac on October 24, 2008, 04:21:28 PM

Title: there any way to deactivate " maintain aspect ratio"
Post by: Triac on October 24, 2008, 04:21:28 PM

Bonjour à tous !!!

LazyCam Pro-version 3.00.2
XP FAM

Excuse me for my poor English ...

... there any way to deactivate " maintain aspect ratio" option in
the scale editor display. It still in gray scale and I can't change it !!!

Have a nice day ....
Bonne journée ....
                                    ...Triac

Title: Re: there any way to deactivate " maintain aspect ratio"
Post by: Overloaded on October 24, 2008, 04:50:15 PM

Triac,
 Changing the aspect ratio does not appear to be a functioning option.
Cannot get it to "enable" here.
Might need to modify the drawing instead.
RC 8)

Title: Re: there any way to deactivate " maintain aspect ratio"
Post by: RICH on October 24, 2008, 05:18:11 PM

HI ALL,
Same here. I thought you may be able to in PROJECT then in the EXTENTS tab change it there / apply but that dosn't seem to work either as a work around. Guess you limited to an even change. BTW  i believe you can scale anywhere along the way ie: once you create profiles you can scale again, but never really checked to see the effect on the cutting.
I'll save that one for someone else to play with. ;)

Oh BTW, hi Triac and welcome.
RICH

Title: Re: there any way to deactivate " maintain aspect ratio"
Post by: Triac on October 24, 2008, 07:08:45 PM

Thank's for yours  reply ...

I will organise and modifier my drawing before transfer it in LazyCam ....

appreciate ....
                             ...Triac