Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: Chip on June 25, 2006, 02:32:55 AM

Title: LazyCam Ver.2.53 or 2.54 in latest Mach3D1.90.052 ?
Post by: Chip on June 25, 2006, 02:32:55 AM

Hi, Art,  Brian and All

First thing's first Mach3V.040 and LazyCam Ver 2.53 are working nice on our IR Waterjet cutter we aren't using to many advanced

feature's yet, but it's working  nice.

Thank's Art, Brian and All for the hard work.

Downloaded Ver.D1.90.052 today.

Line N18 G02  won't load in Mach3D1.90.052.

It loads just fine in Mach3D1.90.050.

Lines  N13, N20, N29  G04's should before the M5's,  I think in Plasma Mode.

N1 (File test55 )
N2 (Sunday, June 25, 2006)
N3 G90 G80 G40 G91.1
N4 G0 X1.0000 Y0.0000 Z0.0000
N5 M3
N6 G4 P0.1000
N7 G1  F10.00
N8    X0.0000  F100.00
N9    Y1.0040
N10    X1.0000
N11    Y0.0000
N12 M5
N13 G4 P0.1000
N14 G0 X2.5020 Y2.0080
N15 M3 S0
N16 G4 P0.1000
N17 G1  F10.00
N18 G2 I-0.5020 J0.0000 F50.25
N19 M5
N20 G4 P0.1000
N21 G0 X2.0000 Y0.0000
N22 M3 S0
N23 G4 P0.1000
N24 G1  F10.00
N25    X4.0000 Y2.0080  F100.00
N26    Y0.0000
N27    X2.0000
N28 M5
N29 G4 P0.1000
N30 G0 Z0.0000
N31 M5 M9
N32 X0.0 Y0.0
N33 G40 G80M30

Thank's Chip

Title: Re: LazyCam Ver.2.53 or 2.54 in latest Mach3D1.90.052 ?
Post by: Chip on June 25, 2006, 03:07:44 AM

Hi, Art, Brian and All

Dissregard the G02 not working in ver.1.90.052 it's working now, who now's why.

Thank's Chip