Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: alex850 on October 07, 2008, 08:51:40 PM

Title: how to make info window come up
Post by: alex850 on October 07, 2008, 08:51:40 PM

for some reason i cant make the info window come up? .it seems to be hideing behind the progect window.i have pressed the info button, but no help there.   thanks for the help  alex

Title: Re: how to make info window come up
Post by: budman68 on October 07, 2008, 09:13:06 PM

Alex,

Are you sure the graphics window isn't dragged down too far that you just can't see it?

Hover your mouse cursor around the bottom lines of the program window and see if it will drag back up for you exposing the info window-

Dave

Title: Re: how to make info window come up
Post by: alex850 on October 08, 2008, 09:02:00 AM

dave i cant find the corner to drag. i have been trying for a couple of days. when i rebot lazy cam still no window. i am really getting a litlle frustrated bcause i cant run my parts.

thanks alex

Title: Re: how to make info window come up
Post by: Overloaded on October 08, 2008, 09:24:51 AM

ALex,
Toggle the Info button till you see the black line at the bottom. Then drag it up.
RC