Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: cdomino on June 19, 2006, 12:24:22 PM

Title: Rhinocam post
Post by: cdomino on June 19, 2006, 12:24:22 PM

If anyone out there is running Mach3 with Rhinocam generated gcode files, would you please recommend a post processor or two that I can check out.

Thanks,
Chris

Title: Re: Rhinocam post
Post by: Graham Waterworth on June 19, 2006, 12:51:18 PM

I use a Fanuc 6M post on AlphaCAM.  It works ok for me.

Graham.

Title: Re: Rhinocam post
Post by: faby on July 29, 2006, 05:59:05 PM

I use visualmill 5, the engine of Rhinocam, and include a mach2 post option.

Fabiano