Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: MachBruce on September 07, 2008, 11:09:06 PM

Title: Work offset touch Button?????
Post by: MachBruce on September 07, 2008, 11:09:06 PM
I am trying to use Work Offsets as described in section 7.2.1 of the Mach 3 user manual.

Written as follows:  "Click the Touch button next to each of the axis in the current Work offset part of the screen".

No matter what I do nothing works as stated.

What the "Touch button"?

Any help please?


Bruce
Title: Re: Work offset touch Button?????
Post by: edvaness on September 08, 2008, 12:20:22 AM


Machbruce'

The "touch button" would be the x-y-z  zero buttons on the right side of the off sets page @ REF ALL.
 The dros on the left side of the screen shows where you are from machine coordinates for each work offset,
wheather its g54-55 or 56-57-58.
Hope this answers your question.

Ed V
Title: Re: Work offset touch Button?????
Post by: MachBruce on September 08, 2008, 02:14:07 AM
That clears it up,

Thanks,

Bruce
Title: Re: Work offset touch Button?????
Post by: Hood on September 08, 2008, 02:54:23 AM
Wow Ed, has Britt taken off her makeup?
;D
Hood
Title: Re: Work offset touch Button?????
Post by: edvaness on September 08, 2008, 12:51:54 PM
No, she just got in a fight with the dog.  ;D
Title: Re: Work offset touch Button?????
Post by: Chaoticone on September 08, 2008, 02:01:57 PM
She is Hot!!!!!!!!!!!   :)

Brett
Title: Re: Work offset touch Button?????
Post by: Hood on September 08, 2008, 02:42:37 PM
Quote from: Chaoticone on September 08, 2008, 02:01:57 PM
She is Hot!!!!!!!!!!!   :)

Brett
Spoken like a true Redneck, man that is your sister!!!!!!!!!! ;D

Hood
Title: Re: Work offset touch Button?????
Post by: Overloaded on September 08, 2008, 02:48:03 PM
I thought maybe it was Ed and Britts offspring...and we were not informed of the "Blessed Event".
(for obvious reasons)
RC
Title: Re: Work offset touch Button?????
Post by: Hood on September 08, 2008, 02:52:13 PM
;D
Title: Re: Work offset touch Button?????
Post by: edvaness on September 08, 2008, 03:28:20 PM
Brett,
   Just like lookin in a mirror  ?   ;D
Ed
Title: Re: Work offset touch Button?????
Post by: Hood on September 08, 2008, 03:48:39 PM
;D imagine what a family gathering of the Chaotic family  would be like, then again maybe it would be best not to imagine it  ;D
Title: Re: Work offset touch Button?????
Post by: Overloaded on September 08, 2008, 04:08:10 PM
Ahhhhh...Family Reunions. The best place to pick-up DATES ! (IF you are a REDNECK of course)
Title: Re: Work offset touch Button?????
Post by: edvaness on September 08, 2008, 04:12:08 PM
The last family reunion. Typical of any in S.C.   ;D
Can you pick out Brett?  :D
Title: Re: Work offset touch Button?????
Post by: Hood on September 08, 2008, 05:31:53 PM
Not sure but I can definitely spot his mother, cousin and sister.
She's the one right at the front ;D

Hood
Title: Re: Work offset touch Button?????
Post by: Overloaded on September 08, 2008, 05:48:42 PM
Like they say.....They all look alike to me. ::)
Title: Re: Work offset touch Button?????
Post by: Hood on September 08, 2008, 05:59:54 PM
Ha ha Brett sure gets some stick ;D
Hood
Title: Re: Work offset touch Button?????
Post by: edvaness on September 08, 2008, 06:38:50 PM
    :D       R..O.T.F.L.M.F.A.O.     :D
Title: Re: Work offset touch Button?????
Post by: Kristin D on September 08, 2008, 07:28:30 PM
Ed,

That's quite a family tree you have there in the photo above!

Kristin
Title: Re: Work offset touch Button?????
Post by: edvaness on September 08, 2008, 07:35:02 PM
OOOOH NOOO,   It's actually Bretts family.  All my inlaws, since I married Bretts twin sister Britt,
Thats enough reason for me not to live in S.C.   :D

Ed
Title: Re: Work offset touch Button?????
Post by: Chaoticone on September 08, 2008, 08:36:51 PM
Looking a little rough there today Ed. Late night with the wife again?

Brett
Title: Re: Work offset touch Button?????
Post by: edvaness on September 08, 2008, 10:59:19 PM
Thanks Brett,
  Your such a BUDDY. :D