Machsupport Forum

Tangent Corner => Tangent Corner => Topic started by: Overloaded on July 21, 2008, 12:51:23 PM

Title: Identify this control.
Post by: Overloaded on July 21, 2008, 12:51:23 PM

I have a very poor photo and no response from the seller yet.
Does anyone out there recognize this CNC control ?
It is on a rig that I may pick up to do a M3 conversion on.
RC

Title: Re: Identify this control.
Post by: Graham Waterworth on July 21, 2008, 01:18:15 PM

It looks very much like a Fanuc 6 but the wording is all wrong, the wording looks siemans.

Have you a link or a better picture.

Graham.
 

Title: Re: Identify this control.
Post by: Overloaded on July 21, 2008, 01:27:02 PM

Sorry Graham...that's all I have right now.
The pic. was in an email.
Hoping for more info soon.
Thanks

Title: Re: Identify this control.
Post by: haydms on September 25, 2008, 02:35:04 AM

It actually is a series 6 by general numeric the Series 6 was a joint venture with Siemens/Fanuc and could be sold either way. In a previous life I worked on the Siemens 6M back in Europe.  BTW it could be sold with or without CRT (version1 / version 2)

Hope that clears it up

Mark

Title: Re: Identify this control.
Post by: Overloaded on September 25, 2008, 07:09:32 AM

 Mark,
I didn't look into it any further and I am certain that it is sold now.
At least now I know what it was.
Thanks again,
RC