Machsupport Forum

General CNC Chat => Show"N"Tell ( Your Machines) => Topic started by: chezyl on July 20, 2008, 06:11:10 AM

Title: yaskawa MP-2300 machine controller
Post by: chezyl on July 20, 2008, 06:11:10 AM

I have new yaskawa MP-2300 machine controller and I need help,
I build woodworking cnc machine and I interested to know if I can use much 3 for this controleer the controller is empty from any software

if any can help I will appreciate

Thank you

Title: Re: yaskawa MP-2300 machine controller
Post by: Hood on July 20, 2008, 07:44:09 AM

Any links to the MP-2300? Is it a controller and drive combo or are there seperate drives?
Hood

Title: Re: yaskawa MP-2300 machine controller
Post by: chezyl on July 20, 2008, 07:58:30 AM

here is link ftp://62.90.87.13/Downloads/Yaskawa/

Title: Re: yaskawa MP-2300 machine controller
Post by: Hood on July 20, 2008, 08:04:09 AM

What servo drives do you have?
Hood

Title: Re: yaskawa MP-2300 machine controller
Post by: chezyl on July 20, 2008, 08:07:16 AM

yaskawa sgdh sigma 2

Title: Re: yaskawa MP-2300 machine controller
Post by: Hood on July 20, 2008, 09:48:13 AM

Ok it looks like your drives can accept Step/Direction signals or as Yaskawa call it, puls/sign. If that is the case then it  means you could use your servo drives connected to Mach. Your motion control I doubt if it could be used as really Mach would be taking its place as Mach is the control.
Hood

Title: Re: yaskawa MP-2300 machine controller
Post by: chezyl on July 20, 2008, 10:02:42 AM

but whot about the controller can he use much software?

Title: Re: yaskawa MP-2300 machine controller
Post by: Hood on July 20, 2008, 10:22:14 AM

Dont think you will be able to use the controller.

Hood