Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: fbolivarp on July 12, 2008, 01:47:39 PM

Title: Gcode interpolation
Post by: fbolivarp on July 12, 2008, 01:47:39 PM

Hello, i am new in cnc works and my english is not very good, but i need help, i generate an nc program with bobcam, and i can previsualisate a good form in the predator software, but when i run the nc program in a mach 3 ver 1.83 and evaluation mode ver 2.6 , when he make an order llike an interpolation in radial or ij mode, he dont make the curve that i design but he make circles that i dont design and the machine go in the opossite direccion. i ll try whit the absolute and inc mode in the configuration, but i dont have any change, i read the chapter 7 of the pdf  tutorial for mach3, someone can help me please, i put an atachement whit my print screen.

Thanks Fernando Bolivar P

Title: Re: Gcode interpolation
Post by: Chip on July 12, 2008, 02:16:03 PM

Hi, Fernando

Post your G-code file, Try changing this setting in Ports&Pins, Turn Options.

Hope this Helps, Chip