Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: BobsShop on May 30, 2006, 12:35:10 AM

Title: LazyCam won't load
Post by: BobsShop on May 30, 2006, 12:35:10 AM

???  I have downloaded and installed Mach3 ver 1.9.  I can see LC in the files menu, but nothing happens when I click on it.  Version 1.9 was installed and I rebooted my computer after installation.

Any Suggestions?

Thanks

Title: Re: LazyCam won't load
Post by: Brian Barker on May 30, 2006, 06:58:30 AM

Can you see the LazyCam.EXE in the mach3 directory?

Title: Re: LazyCam won't load
Post by: Chip on May 30, 2006, 10:06:17 AM

Hi,

If it's Mach3D1.90.040 there's a file you need,  it's glut32.dll

I Attached it below.

Download/copy  it to your Mach3 Folder,  Mach3D1,90.040 folder where the lazycam and Mach
Icon's are that's the file you need.

Hope this helps, Chip

Title: Re: LazyCam won't load
Post by: Chip on May 30, 2006, 10:24:16 AM

Hi,

Art just posted updated Mach3D1.90.040, dosent need glut32.dll now.

Thank's Chip

Title: Re: LazyCam won't load
Post by: BobsShop on May 30, 2006, 11:02:06 AM

Thanks for the quick response.  Yes, I am running Mach Version D1.90.040.  I downloaded the glut32 file provided by afn09556 and was able to get into LazyCam.  I am still confused by afn09556's last response that said there was a newer version of Mach3D1.90.040 because my version was downloaded only yesterday.

Anyway, thanks for the response.  Looking forward to future revisions of LazyCam and Mach3.

BobsShop will now go back to making some chips.

Title: Re: LazyCam won't load
Post by: Brian Barker on May 30, 2006, 02:07:23 PM

There will be a new Rev soon becuase C++ seemed to have an error when it bult the version that is out now :( I will look to see if I can find where the problem cam from .. Thank you and sorry about this..
Brian

Title: Re: LazyCam won't load
Post by: Chip on May 30, 2006, 03:27:39 PM

Hi, BobsShop

This morning Art posted on yahoo that there was a updated D1.90.040 that dident use glut32.dll.

 I downloaded it, it works without the .dll now.

Thank's Chip

Title: Re: LazyCam won't load
Post by: Brian Barker on May 30, 2006, 08:18:43 PM

Chip I have your bug list out and I have about half of them done now :)

I tried to make a video but I ran into a few bugs :( I know when I make this next video Lcam is going to be ready for primetime !  ;D

Title: Re: LazyCam won't load
Post by: Chip on June 01, 2006, 12:38:02 AM

Hi, Brian

Thank's for the reply this is going to be really nice.

I forgot to mention on the G-code files I've been generating in LasyCam the M3's have been listing in the code right after the M5, The M3 should be some 2 lines further down before the Z down to start the next object cut.

I've got Mach3D190.040 running on our IR Waterjet Cutter seem's to be working very nice.

Thank's Chip

Title: Re: LazyCam won't load
Post by: Brian Barker on June 01, 2006, 08:07:33 AM

Thanks!

Title: Re: LazyCam won't load
Post by: Chip on June 03, 2006, 09:27:22 AM

Hi, Brian

Hear is a DXF file and Gcode file generated by LazyCam line N5 the G0 and N9  X62.1030 Y49.1478  are  missing.

The old LasyCam gererates it properly.

Thanks, chip

Title: Re: LazyCam won't load
Post by: Brian Barker on June 03, 2006, 09:48:01 AM

Line 9 should not need the XY pos  but the No G0 at the start is no good :( It is getting fixed this min!
Thank you again
Brian

Title: Re: LazyCam won't load
Post by: Chip on June 03, 2006, 04:41:47 PM

Hi, Brian

Thank's for fast reply, The old LC generated line N9 that way seem's more consistent.

I now its redundent, but displays G02 more typical structure.

Have you got a LC D Ver./ Bata you could send me.

Thank's Chip

Title: Re: LazyCam won't load
Post by: Brian Barker on June 03, 2006, 07:15:19 PM

There will be a new rev in you mail to test in the next day or so... I have a bunch of the code ripped up at that moment. (Fixing more bugs)

Thank you
Brian