Machsupport Forum

Mach Discussion => Brains Development => Topic started by: manoj2s on June 26, 2008, 03:26:48 AM

Title: How to use I/O from Galil 2143
Post by: manoj2s on June 26, 2008, 03:26:48 AM

Hi Friends

I am having Galil Controller 2143, I have downloaded Galil Plugin. Now i can run Motor using Mach3.

But i want to use I/O from Galil Controller.

Can anyone please advice how should i do it??

Regards,
Manoj

Title: Re: How to use I/O from Galil 2143
Post by: poppabear on June 26, 2008, 06:06:02 AM

Yes,

  If memory serves, I think you can enable the I/O in ports and Pins, just like if it was a PP port. You match your 1st input from the Galil with the INPUT1 in ports and pins.

   I think someone posted up a Document, How to about this a while Back, I just cant find the doc/howto.
Perhaps someone like "Derek Ashburn" (aka "Hillbilly"), on the cnczone, and I forgot his user name here. He just put one on a machine not to long ago, that I helped him with a screen and Brains for it. I think he said, you have to look at your boards docs and enable this or that jumper or something, and then it comes into mach just like it was a PP port.

scott