Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: jeff8451 on June 21, 2008, 11:45:31 AM

Title: difining a axis
Post by: jeff8451 on June 21, 2008, 11:45:31 AM

I am needing to define a axis to straighten a bore on a horizontal mill. Can someone direct me through this process of defining a axis and getting it into the g code.

Title: Re: difining a axis
Post by: Graham Waterworth on June 22, 2008, 10:11:04 AM

I am not sure what you are wanting, can you give more detail on the problem.

Graham.