Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: SimonD on April 23, 2008, 01:35:18 PM

Title: Boxford 190VMC
Post by: SimonD on April 23, 2008, 01:35:18 PM

I have just taken delivery of a Boxford 190VMC with automaic toolchanger, it is a 1995 machine and looks like it is PC controlled, but I cannot swear to that. It appears to be fully working and manually jogs, spindle runs etc.

I have no information with the machine except for a "student lesson manual" which is about as much use as a chocolate teapot for the conversion of it!

Does anybody have any information please. I really need anything anybody can throw at me from wiring diagrams, user manual, where to buy the toolholders etc.

Many Thanks
Simon

Title: Re: Boxford 190VMC
Post by: tmsmith on April 26, 2008, 03:10:08 PM

See if you can get in touch with Graham Waterworth, he his very familiar with the machine.

tmsmith

Title: Re: Boxford 190VMC
Post by: SimonD on April 26, 2008, 03:19:07 PM

Quote from: tmsmith on April 26, 2008, 03:10:08 PM

See if you can get in touch with Graham Waterworth, he his very familiar with the machine.

tmsmith

Many thanks for the pointer...  Graham has kindly contacted me already about the VMC and has been most helpful.
I will post some pics here later today hopefully to give people an idea of the machine.

Thanks
Simon

Title: Re: Boxford 190VMC
Post by: SimonD on April 26, 2008, 05:17:43 PM

Some pics...