Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: woffler on April 21, 2008, 12:55:09 PM

Title: re rapid speed to high
Post by: woffler on April 21, 2008, 12:55:09 PM

is there a way to slow down the rapid speed of a particular axis

Title: Re: re rapid speed to high
Post by: Overloaded on April 21, 2008, 01:01:08 PM

Sure,
Go to motor tuning, select the axis and slow it to whatever you like.
Dont forget to hit SAVE or it will not be changed.
RC