Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: Dustynb on March 13, 2008, 05:55:47 PM

Title: 3D Basic Design Help Will Pay $$$ EnRoute
Post by: Dustynb on March 13, 2008, 05:55:47 PM

Hello, This is my first post.  We rrecently purchased a machine along with EnRoute.  I know absolutly nothing about the product.  Would someone like to make $100?  I will gladly send from a verified paypal account.  The 2 designs iare extremly basic and is nothing but rectangles of 5 different sizes and 3 different cut depths.

Hopefully this will give me a pattern to work from, where I can start creating new designs on my own.
Please help,

Dustyn Bell
$100 Tulsa, Ok

Title: Re: 3D Basic Design Help Will Pay $$$ EnRoute
Post by: Chip on March 14, 2008, 12:41:18 AM

Hi, Dustyn

Dose your machine use Mach3 for it's control, What size rectangles and depth of cut, Cutter size, Outside or inside cut's ?

Thanks, Chip

Title: Re: 3D Basic Design Help Will Pay $$$ EnRoute
Post by: Dustynb on March 14, 2008, 01:17:35 PM

Thnaks for the reply, I sent you a pm and e-mail as well.  Please let me know if your interested.  I would need it completed by midnight tonight.

will up to $125 if you can get it done.

Thanks Again

Title: Re: 3D Basic Design Help Will Pay $$$ EnRoute
Post by: Chip on March 15, 2008, 12:39:52 AM

Hi, Dustyn

Hears a shot.

Chip