Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: drexen16 on March 10, 2008, 01:20:11 AM

Title: Denford Orac Lathe
Post by: drexen16 on March 10, 2008, 01:20:11 AM

I am a user of mastercam X2 educational version and I am currently enrolled in a CAM class at my high school. My teacher just got a new Denford Orac Machine and wants to test it out but hasn't had any free time in the last week because he also teaches other classes. We have not yet been able to write a simple program because we have not learned it as we just got the machine and just finished setting it up yesterday. i am wondering if anybody is willing to let us use a short program that you have written in G-code in order to test our new machine or let me use a post processor that writes the correct code for the lathe. We don't want it to be that big so please limit diameter to 2 or 3 inches, length no more than 5.

Thank you very much if you can help me.


Los Gatos High School
CADD/CAM 2nd year

Title: Re: Denford Orac Lathe
Post by: docltf on March 10, 2008, 01:41:21 AM

here is one you can have,it was used a v-carving.good luck in school.

bill

Title: Re: Denford Orac Lathe
Post by: Graham Waterworth on March 10, 2008, 03:35:08 PM

Hi Bill,

sorry to say the Orac is a lathe, I don't think your code V-Carving is any use to them.

Graham.

Title: Re: Denford Orac Lathe
Post by: docltf on March 10, 2008, 10:24:22 PM

drexen16

          sorry about that ,misread your post and thinking something else.all my code is for the mill.
          maybe one of these lathe guys might post something for you.

bill