Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Glenn on February 29, 2008, 11:02:09 PM

Title: monitor too small
Post by: Glenn on February 29, 2008, 11:02:09 PM

Hi Art & Gang,
 I have a  different monitor now (15 inch) and while trying to size mach3 to fit, the config. page does not totally show up, so I can't hit the "okay" button while trying to "fit to screen " 'cause alot of the outer edges are cut off, hitting enter does not lock my check mark in, and re-booting didn't get it either. Are there other options to lock in the option of "fit to screen size" without seeing or clicking the okay button?
I searched mach forum and couldn't find a solution, please redirect me if this has already (most certainly it has) been covered and resolved. Thanks! Glenn :)

Title: Re: monitor too small
Post by: Glenn on February 29, 2008, 11:52:10 PM

Hi Again,
 Sorry about the unnecessary Thread, when my 19 yr. old son got home, he fixed this simple problem by right clicking the
desktop, left clk properties,lft clk settings,slide the screen resolution to the right, and it fixed it.
  Mach3 is Awesome (patiently awaiting lazyturn pro)
   Thanks,  Glenn

Title: Re: monitor too small
Post by: jimpinder on March 02, 2008, 08:22:22 AM

At my age I ask my GRANDSON !!!