Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: sprockett on October 26, 2005, 11:57:16 AM

Title: spindel speed sensor
Post by: sprockett on October 26, 2005, 11:57:16 AM

Im setting up a spindel speed sensor. producing 1 high pulse per revolution.
Where are the settings for spindel speed in mach turn3? ???

Title: Re: spindel speed sensor
Post by: Art on October 27, 2005, 09:56:36 AM

Hi:

 Feed the sensor to the Index input. The system will auotmatically calibrate the display to it.

Art