Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: wnevels on February 23, 2008, 09:49:53 PM

Title: lazy cam turn arc
Post by: wnevels on February 23, 2008, 09:49:53 PM

Lazy cam turn has always put in G3 instead of G2.  So far I have always just done a find replace.
I'm not whether its a switch that i have set wrong or just the way it thinks.
I'm wonderiing if I was to change it to rear post would that fix it.
Mine is a front post.

any ideas.

Wes

Title: Re: lazy cam turn arc
Post by: freddy on February 24, 2008, 02:19:24 PM

Under Config/Ports and Pins/Turn Options, there is an option for Reversed Arc's in front post, however you'll need to change it back if you use a wizard.
Hope that might help.

Title: Re: lazy cam turn arc
Post by: wnevels on February 24, 2008, 03:57:45 PM

reversed arcs was checked.
unchecked it and now all is good.
Thanks that had been driving me nuts

Wes