Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: lew on February 23, 2008, 11:15:36 AM

Title: Settings
Post by: lew on February 23, 2008, 11:15:36 AM

Hi All:
I'm pleased to report that my retrofit using Mach works just great.
I've posted this question before but forget what the replies were.
What settings do I need to incorporate so that Mach remembers the DRO numbers when I last quit the program?
Thanks in advance.
Lew

Title: Re: Settings
Post by: Overloaded on February 23, 2008, 11:25:42 AM

Hey Lew,
Glad it's working for ya.
Try checking this box under General Config....
Good luck,
RC

Title: Re: Settings
Post by: lew on February 23, 2008, 11:28:51 AM

Thanks, I'll try it in a bit.
I did find my previous post and the replies then were to uncheck the copy G54 from ? on startup. I'll look at that too.
LEW