Machsupport Forum

General CNC Chat => Show"N"Tell ( Your Machines) => Topic started by: joechevy2000 on February 22, 2008, 04:34:26 PM

Title: Joe's CNC 4x4 Hybrid
Post by: joechevy2000 on February 22, 2008, 04:34:26 PM

Joe's CNC 4x4 Hybrid.

Here is my new 4x4 machine i built.

Running Mach3.

Title: Re: Joe's CNC 4x4 Hybrid
Post by: Overloaded on February 22, 2008, 05:05:07 PM

SHWEEEEEET ! !
Fine Job,
RC

Joe, I just noticed the blue hose cable carrier.. That is EXCELLENT ! I NEVER would have thought of that and haven't seen it anywhere else either.
(But I'm new)

Thanks

Title: Re: Joe's CNC 4x4 Hybrid
Post by: Serhey on February 26, 2008, 01:39:56 PM

Come on, man! Haven't you seen my add just before you? Help me to build the control for my machine, please. It's not free.
serhey778@gmail.com

Title: Re: Joe's CNC 4x4 Hybrid
Post by: Serhey on February 26, 2008, 01:40:43 PM

B.T.W. what is this machine doing?

Title: Re: Joe's CNC 4x4 Hybrid
Post by: joechevy2000 on March 04, 2008, 12:42:00 AM

have run it over 3 hrs straight at times, nesting parts, drilling, pocketing, and cut outs. will be doing 3d soon.

link to my machines section on cnczone...

http://www.cnczone.com/forums/forumdisplay.php?f=346

joe

Title: Re: Joe's CNC 4x4 Hybrid
Post by: Briancnc on March 23, 2008, 12:27:12 PM

Here's my 4x4 Hybrid, thought it would be appropriate to post in here since its on the same design. This is #2, joe's being number 1. We now have around 80 members in the community many of who are building the same machine now. I think there are around 4 people now that have this machine built, 1 or two in addition to joe and I that are cutting. In a short time it has taken off. Much of the power of this machine is backed by Mach3, thanks for creating such a great piece of software!

(http://www.vi01.com/cnc/hybrid/updated/tslot2.JPG)

(http://www.vi01.com/cnc/hybrid/updated/tslot1.JPG)