Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: RICH on February 05, 2008, 09:33:11 PM

Title: CAN'T GET MY CAMERA TO WORK - VIDEO PLUG IN - HELP
Post by: RICH on February 05, 2008, 09:33:11 PM

My "webcam" works fine when I want to use Video in MACH 3. When I try and use a 3 mega pixel camera
the plug in gives: ----- Video OCX ( video ) Driver can't be connected ------
The 3 mega pixel camera ( DCM 300 microscope camera ) works fine in all my other software.

How do you get MACH 3 to recognize it? Is the video plug in limited to web cameras?

Any help would be appreciated as this camera with the right len's attached to it is just dynamite!
Thanks,
Rich



 

Title: Re: CAN'T GET MY CAMERA TO WORK - VIDEO PLUG IN - HELP
Post by: Chip on February 06, 2008, 03:56:47 PM

Hi, Rich

I have a web-cam  that won't work also.

Maybe some one will let us both now what the problem could be.

Not Alone, Chip