Machsupport Forum

Mach Discussion => FAQs => Topic started by: bigedwood on February 04, 2008, 06:00:43 PM

Title: cannot use gen config screen cannot view entire screen
Post by: bigedwood on February 04, 2008, 06:00:43 PM

 ???try as i may, i cannot find a post to change the gen config page size so i can view all fields. i have touch screen 640x480 res. no adjustment in res available with windows fields?? any help out there ????newbie

Title: Re: cannot use gen config screen cannot view entire screen
Post by: Greolt on February 05, 2008, 06:19:40 AM

Interested to see any replies.

I have the same problem.  800 x 600 screen.

Even worse for the Shuttle Pro set up screen.

Greg

Title: Re: cannot use gen config screen cannot view entire screen
Post by: eggoaust on March 15, 2008, 04:19:48 AM

If you change your screen resolution to 1024 x 768 - BUT MAKE SURE you leave colour set to Medium 16 bit - all should be fine.

If you are unable to set/change your screen resolution you may need to install correct video card driver first.

Eggo