Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: RICH on January 27, 2008, 03:47:43 PM

Title: LAZYCAM LATHE - FOR A NEWBIE
Post by: RICH on January 27, 2008, 03:47:43 PM

Attached file provides info on using Lazycam for the lathe. Hopefully this will help other newbies like me.
It's no video and it's not perfect but then it's a whole lot better than nothing!

Title: Re: LAZYCAM LATHE - FOR A NEWBIE
Post by: fisherjim on January 28, 2008, 04:38:19 PM

Well Done