Machsupport Forum

Third party software and hardware support forums. => Modbus => Topic started by: rex2 on January 26, 2008, 10:39:16 PM

Title: Mach3 config
Post by: rex2 on January 26, 2008, 10:39:16 PM

Hi all
Has any body configed Mach3 with Peter Hommand Mod IO and Bob Campbell Brake out board at the same time.If so How

Title: Re: Mach3 config
Post by: Peter Homann on January 28, 2008, 04:55:48 PM

Hi,

There should be no issue with having them both working with Mach3. What is is that you are wanting to configure?

Cheers,

Peter.