Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: DennisF on November 25, 2007, 09:37:45 PM

Title: Re: printer cable pin connectiion
Post by: DennisF on November 25, 2007, 09:37:45 PM

Hi Guy's
Well i am about to try and connect one drive to my milling machine some where i had seen a connection pin out but can not find now can anyone point in that direction please.


Dennis

Title: Re: Re: printer cable pin connectiion
Post by: Chip on November 25, 2007, 10:10:22 PM

Hi, Dennis

Hears one http://www.doc.ic.ac.uk/~ih/doc/par/

Thanks, Chip

Title: Re: printer cable pin connectiion
Post by: Chaoticone on November 25, 2007, 10:30:39 PM

Here is another. It is in the links section, non-catagorized section.

http://www.lammertbies.nl/comm/cable/parallel.html#prnt

Brett

Title: Re: Re: printer cable pin connectiion
Post by: DennisF on November 26, 2007, 11:29:48 AM

Thanks Chip
 Would there be a schematic to connect the printer cable to the Gecko drives as well somewhere.

Dennis