Machsupport Forum

Mach Discussion => Mach4 General Discussion => Mach4 Toolbox => Topic started by: jorgan202 on September 30, 2026, 05:37:20 AM

Title: Screen Text over sized
Post by: jorgan202 on September 30, 2026, 05:37:20 AM

Hi,  just started using Hobby Mach4, and installed on a Laptop, with the following spec:

Quote

Operating System
         Windows 10 Home 64-bit
      CPU
         Intel Core i7 6700HQ @ 2.60GHz
         Skylake 14nm Technology
      RAM
         16.0GB Dual-Channel DDR3 @ 798MHz (11-11-11-28)
      Motherboard
         HP 80EE (U3E1)
      Graphics
         Generic PnP Monitor (1920x1080@60Hz)
         Intel HD Graphics 530 (HP)
         2047MB NVIDIA GeForce 940M (HP)
         ForceWare version: 353.54
         SLI Disabled
      Storage
         1863GB Seagate ST2000LM003 HN-M201RAD (SATA )

All the "text" in the boxes on the screen are way oversized, see screen shot. I don't even know where to start looking. I did try change the Laptop screen resolution but that has no effect what so ever. I would very much appreciate some advice and where to look, many thanks in advance.