Machsupport Forum

MachPro => MachPro General Discussion => Topic started by: edcross on August 13, 2026, 10:01:49 AM

Title: M31 control
Post by: edcross on August 13, 2026, 10:01:49 AM

I have lost my drive - no home - no jog . If i jog the dro showes movement on the screen but the axis does not move , any thoughts .

     Ed

Title: Re: M31 control
Post by: paul.stephens on August 21, 2026, 04:06:12 PM

We are tackling this issue in a support ticket. I will post results once the root cause is found.