Machsupport Forum

Third party software and hardware support forums. => HiCON Motion Controller => Topic started by: peu on March 26, 2026, 12:56:18 PM

Title: Legacy Syil X5 with Hicon 7754 controller
Post by: peu on March 26, 2026, 12:56:18 PM

Hi, I would like to know if the last release of the drivers for this Hicon 7754 controller are available somewhere, I have to do a full reinstall and dont have the provided drivers from 10 years ago.

I had this link but it no longer works: http://www.vitalsystem.com/portal/motion/hicon/hicon_integra/Mill3Axis-Integra.zip

Thanks a lot in advance

(https://i.imgur.com/QzfCb6t.jpeg)

Title: Re: Legacy Syil X5 with Hicon 7754 controller
Post by: peu on March 29, 2026, 06:07:40 PM

If anyone has the files and can attach them to a reply I will greatly appreciate it. Tried the wayback machine archive but vitalsystems requested to be excluded from it.

Received this reply from the company which is contradictory regarding the files needed...
"Sorry I cannot find the old document.  We do have the old plugins and firmware and some mach4 screens.  They are available for purchase on as-is basis without any warrantee or support.  If you like to purchase them, you can buy the Bronze support package and will email you the files."

I replied if the files are available without support but got no reply yet.

Thanks a lot

Title: Re: Legacy Syil X5 with Hicon 7754 controller
Post by: paul.stephens on March 31, 2026, 10:06:52 AM

You may be able to use the Current HiCON integra plugin and Firmware, however, you may have too big of a jump in FW and may need to relicense your hardware through Vital. I would recommend reaching out to Vital Systems for help in regards to this issue.