Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: rocmen on February 09, 2026, 09:44:27 AM

Title: step motors
Post by: rocmen on February 09, 2026, 09:44:27 AM

my motor on X axis steps back and forward one step then locks up  they all worked when i took machine apart to upgrade the wheels
so i may have  broke a wire i am testing the wirers for continuity  any suggestions would help thanks rocmen

Title: Re: step motors
Post by: paul.stephens on March 09, 2026, 10:37:59 AM

Check to make sure that your Step and Direction (Or Pulse, Direction) wires are not swapped.