Machsupport Forum
Third party software and hardware support forums. => CS-Lab => Topic started by: Michaelc on July 13, 2025, 11:57:22 AM
-
Hi, can anyone help. My set up, Windows 11 worse luck, demo version of Mach4 turn, and CSMIO/M controller. Now information is thin from all companies and I have found nothing about resetting the network adapter to the settings the CSMIO/M controller needs. This was so easy with windows 10.
So after a hour trolling the internet I found some information on changing the network adapters address. But it must of been for an older version of windows 11 because it looks like I have done it correctly but the LED light on the controller is not on and Mach3 can’t find the controller.
Can anyone help me out in simple terms. Thanks