Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Spandex on July 13, 2025, 05:18:15 AM

Title: Strange Circles
Post by: Spandex on July 13, 2025, 05:18:15 AM

Hi guys, I created a part in FreeCAD. When I start Mach 3 on the same workstation that I have FreeCAD installed on, everything appears to be fine. When I transfer the .nc file to my computer connected to my CNC machine, I suddenly see strange circles. Does anyone know what might be happening?

Title: Re: Strange Circles
Post by: TPS on July 14, 2025, 01:14:20 AM

have a look for Config -> General Config -> IJ Mode

Title: Re: Strange Circles
Post by: Spandex on July 16, 2025, 09:38:31 PM

Thank you I will look into it.