Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: alfatal on June 02, 2025, 06:25:10 PM

Title: asking for help
Post by: alfatal on June 02, 2025, 06:25:10 PM

When I copy the file (NcUsbPod.dll) to the folder (PlugIns) and when I move the machine, this message appears (stepPer=0). Please help

Title: Re: asking for help
Post by: TPS on June 03, 2025, 01:32:17 AM

you have to setup your motor's/machine

have a look to chapter 5.5:

https://www.machsupport.com/wp-content/uploads/2013/02/Mach3Mill_Install_Config.pdf