Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Lifely on April 22, 2025, 02:30:15 AM
-
Hi All
Please please please, I am very new to cnc machining and i have had some problems. Firstly i was using MACH 3 which was fine as far as the arrows made the machine move. But i had problems loading files into mach 3. so i decided to download the MACH 4 to try that. All the files loaded fine but i cannot move the machine now. I have tried to use mach 3 again but that has also now stopped working
please help