Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: alex850 on March 17, 2025, 04:02:50 PM

Title: help with non concntric circles
Post by: alex850 on March 17, 2025, 04:02:50 PM

need help please with circles created in bobcad cam . once g code is loaded in mach 3 the shape changes to like a oblong or similar shape,not the way i draw them in bob cad. i have not used mach 3 in years so i cant remember what i changed on the gcode or in configuration to make it correct/
thanks in advance

Title: Re: help with non concntric circles
Post by: ZASto on March 19, 2025, 03:45:11 AM

Might be that you messed StepsPer in motor tuning or you have some mechanical problem.

Title: Re: help with non concntric circles
Post by: Graham Waterworth on March 21, 2025, 08:43:38 PM

Post your code here so we can check it.