Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Giuno85 on March 09, 2025, 11:29:17 AM

Title: G18 compesation z
Post by: Giuno85 on March 09, 2025, 11:29:17 AM

Buongiorno a tutti.
Ho una fresa con testa tiltante manuale, vorrei fresare anche in verticale con piano di lavoro G18 e forare con rispettivo asse ortogonale.
Vorrei sapere se é possibile utilizzare le compensazioni utensile g43 in lunghezza

Title: Re: G18 compesation z
Post by: Giuno85 on March 09, 2025, 05:23:40 PM

I have a milling machine with a manual tilting head, I would also like to mill vertically with a G18 work surface and drill with a respective orthogonal axis.
I would like to know if it is possible to use the g43 tool compensations in length