Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: p7m13 on January 07, 2025, 09:42:22 AM

Title: description of the 10 pin connector of the MACH3 board
Post by: p7m13 on January 07, 2025, 09:42:22 AM

Hello,
I'm looking for the description of the 10 pin connector of the MACH3 board, "White Eagle", red version. All pins, please.
Thanks a lot !

Title: Re: description of the 10 pin connector of the MACH3 board
Post by: JohnHaine on January 07, 2025, 10:55:02 AM

https://buildyourcnc.com/products/electronicsandmotors-electronic-component-breakout-mach3-usb-board

Title: Re: description of the 10 pin connector of the MACH3 board
Post by: p7m13 on January 08, 2025, 03:42:14 AM

Thanks. I've found this page 30 minutes after my topic