Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: JoNo on November 20, 2007, 02:22:50 PM

Title: Using Lazycam to mill Printed Circuit Boards
Post by: JoNo on November 20, 2007, 02:22:50 PM

Good Day to all. I am trying to use Lazycam to import GERBER (.GBR)  format PCB plot files and then to generate the isolation G-Code file to mill out the copper areas around the PCB tracks, using Mach3.  I cannot seem to get Lazycam do do what I think it should and cannot find any help topics on this subject.  I have tried very simple Gerber plot files to quite complex ones and the behaviour is similarly confusing. Any help would most kindly be appreciated.
Thanks.

Title: Re: Using Lazycam to mill Printed Circuit Boards
Post by: Chip on November 20, 2007, 04:12:48 PM

Hi, JoNo

Post your file use the Reply Button and Attach.

Thanks, Chip

Title: Re: Using Lazycam to mill Printed Circuit Boards
Post by: jdavis211 on November 26, 2007, 05:25:14 PM

I havent tryed milling a PCB, but I used the excellon drill import,  works great!

Jeff Davis