Machsupport Forum

Support => Downloads => Macros => Topic started by: OtterLove on October 01, 2024, 05:10:04 PM

Title: Mach4 dual axis for z and a axis swap.
Post by: OtterLove on October 01, 2024, 05:10:04 PM

m831.mcs is the change axis from z to a. m832.mcs is the reset of axis z and a back. The g-code example is also included. Placement of the *.mcs files should be under profile then under macros. m831 resets all motors for both z and a. So if you're using slaves... not a good idea.

Title: Re: Mach4 dual axis for z and a axis swap.
Post by: OtterLove on October 06, 2024, 02:41:55 PM

It appears that I have failed to load the files from the last post. Sorry so here they are...